Samsung Odin 3.14.4 is found as a hunting ROM/firmware flashing tool, it is true because of the success rate of Samsung Odin download application. XDA developers are the development crew behind Odin flashing tool.Version 3.14.4 is the latest release of the Odin flash software series. This software compatible for Windows platform and it is really easy to flash ROMS or firmware using Odin flash tool. So you can flash almost all the samsung devices including Samsung galaxy 21, 20, Note 20 and many more.
Following guide will assist you with a simple explanation about Odin flash tool basics. Please continue the tutorial to find out more.
Download Odin flash tool, latest Odin 3.14.4 and Odin 3.14.1
Make appropriate backups for your device to save your important data.
Windows based PC with good condition.
USB cable to make the connection between PC and device.
Download and setup latest “Samsung USB drivers”
You should enable USB Debugging mode on your device, otherwise device may not connect to PC properly.
Install Samsung Odin Download on PC.
Step 1 : Go to our above official link to download Odin 3.12.3 latest version using your browser.
Step 2 : Extract Odin .zip file and right click on the Odin application, choose “Run as Administrator”.
Step 3 : Check shown options via “Options tab” as shown in the below image.
Step 4 : Assume you are using a single ROM, browse the ROM file by clicking on the PDA button and locate the (*.md5 or *.tar) file of the particular ROM.( You can download all stock firmware for Samsung devices from Chain Fire’s official site)
Step 5 : Make sure that you have disabled your antivirus protection and disconnected other USB devices which are not in use right now.
Step 6 : Turn off your device and reboot it in to the Odin download mode. See below image.
Step 7 : Now you should connect your device with the PC using USB cable, wait for sometime to install drivers for Samsung Odin version 3.12.3. The ID:COM will change in to blue and it will show the COM port that your device is connected in. Also the message tab will pop a message saying “Added” once your device is properly added by Odin download.
Step 8 : When all the things are ready hit the Start button to begin flashing ROM via Odin download on your device and wait for several minutes for the completion.
Step 9 : The device will reboot automatically, Here’s the good news – Odin download performed flashing your new firmware successfully. Have fun with your android. Cheers.
How to Flash Custom ROM via Odin?
Step 1: Right-click on the Odin exe file and start it as an administrator
Step 2: Connect the Samsung Phone or Tablet to the PC (in Download Mode)
Step 3: Let Odin detects the connected device which will be notified with an “Added” message in the left Panel. And at the same time, the box ID: COM should turn blue in color when the device is successful in the connection
Step 4: Then select “AP” and attach the Custom Firmware file there
Step 5: In the checkboxes, only the Auto Reboot and F. Reset Time should be selected while the rest should remain unchecked
Step 6: Now continue to “Start”
Step 7: Now you need some minutes wait. So please do not disturb the process or remove from the connection until it is completed in the progress. Once finished, it will show the success of a green “Pass”. And do not get troubled if your device gets rebooted a number of times
Congratulations! you are successfully done flashing a Custom ROM to your Samsung. So now you can disconnect the device from the PC and start the use as usual. But remember it is now like a new handset with all fresh system alterations.
Thanks to developers of Samsung Odin download Application to flashing ROMs.